XPERTCHEMY® Underwater Pool putty is a two part epoxy putty used for repair cracks and leaks in or around your Pool, Tile, Concrete, Fiberglass, and a Variety of Other Surfaces. Cures / hardens underwater or above the water.

USAGE DIRECTIONS

1.Gloves should be worn.
2.Surface to be prepared must be clean and free of oil, grease or wax. Smooth surfaces to be abraded.
3.Take out the Epoxy Putty stick from the tube and cut a required amount needed. Mix thoroughly by hand till uniform colour is achieved.
4. Apply to required areas immediately. Apply slight pressure to ensure good bonding. The Putty will become warm while it sets. Do not bend or move parts while curing takes place.

FEATURES

• Steel Reinforced & Non-Rusting.
• Quickly Repair Or Rebuild.
• Can Be Molded, Shaped, Sanded, Drilled And Tapped.
• Incredibly strong – 1550 PSI.
• Can be used underwater or on wet surfaces.